Monthly Archives

5 Articles

Posted by Marsha Alvarez on

Essential Guide For Parquet Flooring

Parquet flooring is possibly one of the most beautiful flooring types available, how it is produced. Instead of traditional planks, small slats of wood featuring an end-grain facing upwards are created into tiles of various sizes. An example would be 600mm by 120 mm. The average thickness of these tiles will range between 15 mm to 21 mm.

General Production of Parquet Flooring Tiles

The wood pieces will be arranged into distinct patterns, which typically repeat; however, there are times where adjoining tiles will form to create a much larger pattern. The wood pieces will be bonded together with the substrate for an easier installation. They met metal are plastic frames can be used you hold together the shape of the arranged wood pieces. This type of manufacturing flooring is known as parquetry.

There will be more than one type of timber or color used to create an attractive contrast with some flooring. One of the most common species of wood in parquet flooring is oak due to its affordability. Walnut is also another popular option with other exotic wood species used; however, this type of flooring cost is significantly higher.

It should also be noted that parquet flooring may be created by gluing or nailing individual pieces of wood directly into the sub-floor to create unique patterns. This is a relatively high intensive process that is going to raise the overall cost of installation as opposed to using pre-manufactured tiles.

A unique side note on shopping for engineered parquet floor: there is a wide variety of pattern names and general patterns. Many times, manufacturers will use similar names for different patterns. With this in mind, you always want to look at the flooring before you purchase it.

Finished Parquet Versus Unfinished Parquet

There are two specific options when choosing parquet flooring – finished and unfinished. There are advantages and disadvantages to each type of flooring.

Unfinished Parquet Flooring: there are several advantages in the installation of unfinished flooring as you can choose your stain, sealant, finishing treatments, as well as anything else to achieve a custom look. However, unfinished flooring is highly susceptible to damage from stains and water, ensuring the flooring finished immediately after installation.

Finished Parquet Flooring: There is a lower flooring cost when the tiles have already been finished at the factory with the benefit of high durability. A factory finish also means that there will be less work in your home without the need for such a mess. One of the downsides of a pre-finished floor means you have fewer options for a custom look.

Where to Install Parquet Flooring

While this flooring can be installed in any room, there are somewhere it is better suited.

Formal Areas: parquet flooring can be quite stunning and is an excellent complement to elegant spaces in hotels, homes, office buildings, and conference centers. There is no other flooring that can combine the natural beauty of wood with true craftsmanship. Its unique design makes it a stunning choice for dining rooms, living rooms, entryways, and open spaces designed for formal occasions.

Small Spaces: Parquet flooring requires an area in which the whole floor can be admired as a whole as opposed to individual tiles. Parquet flooring would not do well in a kitchen where tables, chairs, and cabinets will overshadow the beauty of this gorgeous flooring. Parquet flooring is typically too busy for any type of a confined space. Many times it will create a feeling of clutter in small areas.

Parquet Flooring Installation

Parquet tiles are designed with straight edges instead of tongue and groove and designed to be placed up to one another on the flooring field. It is essential that a small expansion area between 4 and 8 mm be left around the room’s perimeter and covered with trim. The vast majority of parquet flooring is glued to a subfloor, whereas thicker flooring may be nailed down. When nailing tiles down, if they should split, you will need to install them with glue.

Note on installation: the vast majority of parquet tile patterns will need to be installed in a specific manner to complete a much larger pattern. You will need to pay close attention to the directions to complete your floor correctly. One good test is to lay the floor out entirely prior to complete installation to the subfloor. This is known as conducting a dry layout.

Water and Parquet Flooring

Water has always been the number one enemy of timber floors. However, parquet flooring is able to handle water slightly better than wood planks. With this in mind, it is still not wise to install parquet flooring in basements, lunchrooms, and bathrooms where the wetness has the ability to warp, swell, and otherwise tear your parquet flooring apart. Whenever your flooring gets wet, you will want to dry up the moisture as quickly as possible.

Parquetry Flooring Refinishing

Parquet flooring can be refinished as many times as regular hardwood flooring of the same thickness. Parquet flooring is not produced with a tongue and groove design, which would limit the number of times traditional hardwood planks may be refinished, allowing more original flooring material to be removed before the floor is replaced.

However, the process of refinishing a parquet floor is quite challenging as opposed to a regular floorboard. This is due to the grain end facing up and not being generally consistent with one another. You will not want to use a power sander on this flooring type as it will leave an inconsistent finish with the possibility of grain scratches appearing. In some cases, you will need to sand these by hand to create a smooth surface that is ready to be sealed.…

Posted by Marsha Alvarez on

An In-depth Guide On How To Maximize The Durability Of Your Wooden Floors

Looking for a flooring material that will make your home look stylish and elegant? Well, you cannot go wrong with a wooden floor. Many homeowners love wooden floors for many excellent reasons, such as the fact that timber floors give a home a stylish look that cannot be achieved with other flooring materials. Further, when properly maintained, wooden flooring tends to last for eons. With just the benefits mentioned above, it is easy to see why many property owners prefer wooden floors above all other options.

If you are a first time owner of a home fitted with wooden floors and you are wondering how you can ensure that your flooring remains beautiful and pristine for as long as possible, we have compiled a detailed guide on how to maintain your floors best. If you follow the tips above, you will soon find out that taking proper care of your floor happens to be as easy as ABC.

Polishing & General Wooden Floor Care Tips

You should always ensure that you are cleaning timber surfaces with gentle tools that will not cause any abrasions and scratches, for starters.

Ideally, it would help if you cleaned your floorboards at least once a week with a broom with soft bristles to prevent the surface from getting scratches. Cleaning once a week is recommended since it prevents the accumulation of large debris that can cause a lot of damage through scratching. If your floor has sticky stains that cannot be removed with a broom, use a mop but ensure that you wipe your floor with a dry cloth immediately afterward to prevent damage by moisture. Cleaning your wooden floors in the following ways is a great way to ensure that they remain dust-free. Further, in the process, you will also be enhancing your wooden floors’ longevity by many years.

If you see that your floors are losing their luster, there are many types of wooden floor polishes available in the market. Though you can carry out DIY polishing of your floors, it is best to leave this work to professionals. A skilled contractor will carry out the job skillfully and ensure that you are left with glossy and shiny floors.

Top Tips For Carrying Out Regular Maintenance

No matter how long ago you installed your wooden floors, they will always give your home an elegant and appealing look. However, to maintain this aesthetically pleasing look in your home, you have to maintain your floors. Below, we have discussed how to carry out proper maintenance on wooden floors.

When walking on wooden floors, avoid using long-heeled shoes or footwear to cause abrasions on the surface. The wrong type of shoes can dent your floors and make them look unappealing. Further, if you have pets, ensure that you install rugs and carpets so that their nails do not scratch the surface.

To prevent your furniture from causing dents on the floor surface, ensure that you install pads or use grippers around the furniture’s legs. Though your floors will eventually sustain damage from regular foot traffic, it is best to take preventative measures against avoidable damage when you can. Remember that in all instances, prevention is better than cure. To maintain the appeal of your floors, invest in the protection of your floors.

It would help if you also took special care to ensure that your floors do not get damaged by fluids. For example, water can cause extensive damage to your floors. When water spills are left untouched on a wooden floor surface for long, they can cause the timber to swell up or shift. This type of damage can be complicated and expensive to repair. Further, there is also a high risk of sustaining injuries on a floor that is swollen. Ideally, you should ensure that you mop floors immediately any fluid gets spilled and provide the affected area dries appropriately.

Tips On How To Repair Damages On Your Wooden Floors

Wooden floors tend to sustain minor damages from normal wear and tear. Though this usually gives an abode a ‘lived-in feel’, some homeowners like their properties to always look new and pristine. Should your floor have minor damages, and you want to give it a new look, you can seek out experienced floor contractors in your locality. These professionals will sand, refinish and then polish your floor hence giving it its original pristine look. On calling contractors, you can also take advantage of the opportunity to redesign your floors and give them a new aesthetic appeal. For example, if you have a light-colored floor and want to give your home an opulent and luxurious look, you can add a dark finishing.

If you are looking to add value and style to your home by adding a new flooring material, consider installing a timber floor. Apart from the added aesthetic appeal, you can be sure that this flooring type will last for years to come should you follow the maintenance tips discussed in the article above.…

Posted by Marsha Alvarez on

Your Choice Of Timber Floor

Under the fiberboard, a rubber, foam or fiber base is laid under the planks to reduce noise. Floating floors have small holes, but little movement. If you want tight-fitting floors that do not have holes and little movement, the tongue and groove is for you. 

Colour

If you decide on a floor color, it will be a lot easier to choose the particular type of timber. Within these families, you can narrow to light, medium or dark, which will give you a very special group to choose from.

Grade

 A step up from it is usually called “standard class” and has smaller markings. Giving a more polished feel, it is ideal for those who want a modern yet natural look. The most expensive timber floors will be smooth and grease-free, with only light markings.

Timber is unique from timber to wood, so colors, patterns and textures will never fit perfect for another. This makes the timber floors valuable and interesting, so expect a little diversity from yours when it comes.

Posted by Marsha Alvarez on

Tips For Preserving Timber Floors

If you have a wooden floor, surely one of your concerns is that it does not look damaged and dull. Next we will give you a series of tips to keep them and make them look like new.

To remove dirt that can accumulate on the floor, it is best to sweep the floor with a brush with soft and fine bristles, as they are ideal for capturing dust.

Once you have thoroughly swept everything , wipe it with an almost dry cloth, just moistened in a formula composed of half a cup of white vinegar that you will dissolve in 4 liters of water.

Remember not to leave the floor wet as this will cause the timber to deform. Never use cleaners with an oily base, especially if the floor has just been laid, as it will only help dirt stick and create a nasty layer that is difficult to remove. Surely the place where you buy your wooden floor will advise you on the best cleaner you can apply.

A natural way to keep your wooden floors shiny and like new is to clean them with a liquid that you can prepare with two tea bags in a liter of hot water for two minutes and then spread it over the entire surface with the help of a cloth. This mixture can be alternated with half a tablespoon of olive oil and ¼ cup of vinegar or fresh lemon juice. You will see that your floors will shine at all times as if they had just been waxed.

So that the wooden floor is not ruined, an excellent idea is to place rugs in the places where there is more traffic , so that in this way you can prevent scratches or dirt that damages the surface.

Preserve your floors from scratches by placing sliding pads on each of the legs of the chairs and tables to avoid that when dragging them to run them they leave marks, if possible lift them even when they have protection.…

Posted by Marsha Alvarez on

How To Choose The Correct Floor For Each Of The Spaces?

When thinking about remodeling or construction, one of the most important points that we think about is the floors, since they are the ones that can give the space more elegance as well as more light within it. Currently within the market we can find a wide variety of floors, both in colors, shapes or sizes, but do you know which is the ideal one to use in each space?

Among the floors that we can find in the market, are ceramic, porcelain and grees, in addition to finding polished, enameled, imitation timber and textured finishes. Other options can be laminates or vinyl.

Within this wide variety of floors, we must know which one to choose for each room since each one has its specific functions, characteristics and needs to cover. Not all floors will be the best option to place in each of the spaces.

Textured floors are more recommended for the use of outdoor spaces such as terraces or garages, smooth ones for kitchens, living rooms or dining rooms, while timber imitation is more used in spaces such as bedrooms. Likewise, the imitation of woods are the same used in outdoor spaces since they are rich in textures.

For the kitchen, the use of very smooth floors is not recommended, since this space is where spillage of liquids or other food can more easily occur, and can cause some type of accident inside it, it is not advisable to use floors with textures, since this space is the one that must be kept cleaner because it is the one where food preparation is carried out and these tiles are the ones that can store more dirt inside them.

The ideal type of floor for every room

Rooms:

Being a place used more than anything to relax and get away from the world a bit, thus being your own space, it is necessary to use a floor that provides warmth to it. For this reason, it is advisable to use wood-type ceramics as well as laminate, since they are the ones that provide the most that touch of warmth to the environment in addition to being soft in texture, thus being able to provide a warm touch, for the soles of your feet.

Room:

This space is the second most shared in the house, which is why much more light must be generated within it. It is more advisable to use light-colored floors so that they provide more light within the space, if the place has large windows it could be a great option for the use of floors with darker tones. If not, it is advisable to use smooth floors with light colors.

Garage:

In outdoor spaces such as the garage, it is better to use textured and dark-colored floors, since unlike smooth floors it will prevent the car from slipping in winter, when the floor tends to become more slippery, in addition to As it is a space exposed to the elements, the dark tones help it hide the dirt that it could see inside the space or that it would be exposed to acquire.

Bath:

For the shower area it is better to use non-slip tiles, since it is the area most exposed to moisture, for the bathroom we can use some type of tile with shades that match the color of the paint on the walls, It is more advisable to use some type of ceramic or porcelain since these are the ones that usually have the highest water absorption and can be the easiest to clean when they get wet, in addition to that they do not usually have any type of damage when exposed to this type of weather conditions.